ASTM Testing
Standard Fireplace Test
Myren Consulting, Colville, WA*
August 25-6, 2005

On August 25, 2005 Jerry Frisch and Jim Buckley built a standard/typical western 36" masonry fireplace and the next day on the 26th we tested it using the fuel crib Ben Myren had developed for a metal 36" zero-clearance or "low mass" fireplace - the Heatilator E-36.

Basically the fire went out before the first load had burned after a fairly nice kindling start. Ben thought it may have been due to the combustion air flow over the bottom of the typical door frame. Or it could have been because the masonry fireplace was larger than the E-36, has more mass and needs more fuel.

In the next few days Ben tested the fireplace two more times, with the door frame removed, with a different grate and larger kindling and fuel loads, and each time the fire went out. See his Report linked below.

In all three tests the bed of coals was not sufficient to maintain combustion. It looks as if more kindling and a larger fuel load will be necessary to maintain a fire in a masonry fireplace.

Myren Consulting Report
Building the Fireplace
The Apparatus

Testing the Fireplace

Brand size comparison for second test

Buckley Rumford Fireplaces
Copyright 1996 - 2005 Jim Buckley
All rights reserved.